# Hướng dẫn Cấu hình điện thoại Yealink T19 E2 (Instruction to Configure Yealink T19 E2 phone)

## Set up thiết bị:

(Set up device:)

* Cắm nguồn\
  (Plug in the power source)
* Cắm dây mạng (cổng Internet)\
  (Plug in the network wire (Internet port))

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXe34Q5Som9mwfyZcBxhV5Pev4UMN9WFGE5GjQTLWDPRsB80HYFDCEBNC7Z5W51xsqcoq1V2mD8KDyyzYv-7efDZo9tWHiNqfOMpl9Ad4dmtl-EWZfRhcXAYktyE1vSSfNcKARQkKw?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

* Cắm handset, headset (Lưu ý cắm đúng cổng).\
  (Plug in handset, headset (Note be sure to plug in the correct port).)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXcTszqEHpieCyrn9k1VYtKYtOZBykKkBWsZQByWIXzFLqXj4XP3QfXCIxdBTjbArm8VKuS86ceJUj8V26glPwiliPosj2FBRGHyjsJpCgk9xnLPy1GSPGNl1VGnkYTEb0_bCId4Lg?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

## Network

Mặc định thiết bị sẽ dùng DHCP để lấy IP. Để xem được IP của thiết bị, vui lòng làm theo các bước sau:\
(By default, the device will use DHCP to get the IP. To view your device's IP, please follow these steps:)

## Bước 1:&#x20;

**(Step 1:)**

* Đợi thiết bị khởi động hoàn tất, hiển thị màn hình chính\
  (Wait for the device to boot up and display the main screen)
* Chọn Menu trên thanh công cụ\
  (Choose Menu on the toolbar)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXfdnpfKjRmN7wAlEA0gwYnSRneBMbsGynDzQ6Q80mgtaJIfHHG2zHJY9eXZW5-MLKDMCESLPq8fVbS9IV0EHwrKMO4-kcscIAhseHCmqyaNtzbetGtjgklG5O_3XSkGwmuX0g3U?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

## Bước 2:&#x20;

(Step 2:)

* Main Menu sẽ được hiển thị\
  (Main Menu will display)
* Chọn Status (hoặc nhấn phím 1 trên Dialpad)\
  (Choose Status (or press key 1 on Dialpad))

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXfCzufMbw_0IkBG1UxaD2w2pvoUWN1Kd6ckQ5l7H7UdQ7blfYY4mOqiIpgGm8HjWdCkvrJ6kxHbkPsB3BIXmeCJnbZtkd-ZH_cRaKyqu6iVfOYqMl-QBt61ViQhA2_ch6H3fcyCJA?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

Bước 3: Kiểm tra địa chỉ IP của thiết bị IP Phone Yealink, như trong hình ví dụ bên dưới thì địa chỉ IP sẽ là 192.168.6.137\
(Step 3: Check the IP address of the Yealink IP Phone device, as in the example image below, the IP address will be 192.168.6.137)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXfQ9dZmus_je43ARDIMRsMaQVxYjsKjz3C1A1EYSFtDwRGn8Ei5N6PBrEtzlJCHkY0FnwfHItlVsR8ttUu7J7MHqVZTwhpQ4F195WOLd0MAD5WfLLVWwx-MQOwwLnUWScgtfGMtDQ?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

## Cấu hình SIP account lên IP Phone

**(Configure SIP account on IP Phone)**

### Với thông tin từ device account được tạo trên AntBuddy, ví dụ:

(With information from the device account created on AntBuddy, for example:)

* Account Name: testing
* Authen ID: testing
* Authen Password: 123456
* SIP Server: qahtksungroup.anttel-pro.ab-kz-02.antbuddy.com
* Outbound Proxy: ab-kz-02.antbuddy.com
* SIP Transport: TCP

Thực hiện nhập thông tin này thiết bị IP Phone Yealink T19 E2 theo các bước sau:\
(Enter this information on the Yealink T19 E2 IP Phone device by following these steps:)

**Bước 1:** \
**(Step 1**:)

* Truy cập địa chỉ IP của IP Phone đã nhận trên trình duyệt web (browser), ví dụ ở đây là địa chỉ[ http://192.168.6.137](http://192.168.6.137/)\
  (Access the IP address of the received IP Phone on the web browser, for example here is the address <http://192.168.6.137>)
* Đăng nhập với username và mật khẩu mặc định là\
  (Login by username and default password:)
* <kbd>Username: admin</kbd>
* <kbd>Mật khẩu: admin</kbd>

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXcAqwJ72TfHZPFYtib7ivBkwcAzR_Zc4ikS-F_g6KQf1m8Oy8XmatWBNu8znj3K0Gz5yBeSR_SbkzIIbx9Grx5p88ofEX-w7Thq-Xxh4HOJA_DzgRBKyofiUxZzj_xp5krhBYN8Cw?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

**Bước 2:** Chọn Mục Account\
(**Step 2**: Choose Account section)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXc1slEjU8k6FXFrWWzJxVcZ5Z6w-9m9rILQI_r2edMg67xi_x49HqrF2byny9xso8NAp9vh5BgMQvrK077vr6lyr1i37lQB9vuCd_UkLgg7l6ZkGzP_lEfV7tqTMnRZXjWgFHqy?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

**Bước 3:** Nhập thông tin hình bên dưới, sau đó chọn nút Confirm.\
(**Step 3**: Enter the information shown below, after choosing Confirm button.)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXcbQ5mbY--JrdlD4o4e3OA98dR2ifh9DYpezQ2ea5m_6697PB2RVujahtEsDhtAwaqw5s9dLLAO7Vlw_Va-8h18c9W8O6r1RRpOfra8SE9s5xkc4KEWt1EiBTjF7pZaFhgYcAFH?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

**Bước 4:** Sau khi chọn nút Confirm, kiểm tra thông tin đã được cập nhật (Registered), như hình là hoàn tất việc cấu hình thông tin lên IP Phone Yealink T19 E2\
(**Step 4:** After choosing Confirm button, check the updated information (Registered), as shown in the picture, you have completed configuring information on IP Phone Yealink T19 E2)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXdGb7Y6LAVfvzJtmV7V0Zh3d0h5xaJmzXMp7PPjYo26FG_VFaNBMztRePCEvmOnPXwC37UaYPPfuRhR6qDSoA6Q16gsY5g4TDOGtpgypsNVXz4RReHe2GEUvA8Ks0TP51HZNC0BEg?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

**Bước 5:** Chọn codec PCMU và PCMA là 2 codec chính cho điện thoại trong Account - Codec sau đó nhấn Confirm để lưu cấu hình\
(**Step 5**: Choose PCMU and PCMA codecs as the two main codecs for the phone in Account - Codec, after pressing Confirm to save configuration)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXf5usz-i_8WoISlYIODzrBd00ijGpLM9hSmEGDkqMyzkD-iXPYFSnvxxU7szo71u5GQdJ6Vk6biDPxv04PGHXxueF_TxlSzQg3t-uB20dsmdQ_qZuO074v-1hUR74UmdsQ17C3NNw?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

**Bước 6:** Chỉnh Time zone thành +7 trong Settings  - Time & Date , nhấn Confirm để lưu cấu hình\
(**Step 6:** Adjust time zone to +7 in Settings - Time & Date , press Confirm to save configuration)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXe6y4KbayJgmBH2OR-_lSb0Y0yrCXsuZxlTfl7pgdoB4CdY2VQMzLkWzjhYRBFrDaud00ZPiYtuZqoTvHwm7qz_x6P9DvrVRYJTDhGi7sUdvWSWxVi6t33QOIkPI3PHf69gz8Yuog?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

**Bước 7:** Cấu hình Phím nhấn để thao tác hàng đợi (Nếu không dùng kịch bản có Queue thì có thể bỏ qua bước này)\
(**Step 7:** Configure the key press for queue operations (This step can be skipped if you're not using a script with a Queue))

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXf3mpOTIhMciSbKn8SgtTMxMzlW5iB57uXzug81ZCQv2MkeuCb7Uv_moFc9GelhynvQFQ6J1Cf1Yc99dL6KMG5NCzNm7VgOefucDz4vwBnEkpDQfCOiMnPLWL4cbl7rl8L0jFJT?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

Chọn Dsskey:\
(Select Dsskey)

<kbd>Trong SoftKey 1 , chọn Speed Dial -> Value: 8000 và Label: Login</kbd> \ <kbd>(In SoftKey 1 , select Speed Dial -> Value: 8000 and Label: Login )</kbd>

<kbd>Trong SoftKey 2 , chọn Speed Dial -> Value: 8001 và Label: Logout</kbd> \ <kbd>(In SoftKey 2 , select Speed Dial -> Value: 8001 and Label: Logout )</kbd>

<kbd>Trong SoftKey 3 , chọn Speed Dial -> Value: 8002 và Label: Pause</kbd> \ <kbd>(In SoftKey 3 , select Speed Dial -> Value: 8002 and Label: Pause )</kbd>

<kbd>Trong SoftKey 4 , chọn Speed Dial -> Value: 8003 và Label: Resume</kbd> \ <kbd>(In SoftKey 4 , select Speed Dial -> Value: 8003 and Label: Resume )</kbd>

Nhấn Confirm để lưu\
(press Confirm to save)

<figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXfVled3dGJejWqS1sv3t6D0PExvYmGjVlLwfY2fgDy3sfPYsRHPs0F40BS1QdhMliiRNqO36ba6Qz-MooYkVWBu78BKubknYQda1nPQpd8f7B31KAJ3OOYD9HlAwDyrsiycdXWK?key=uGHpA5A1sEdZ-MIMUOfozg" alt=""><figcaption></figcaption></figure>

Màn hình IP Phone sau khi cấu hình\
(IP Phone screen after configuration)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.antbuddy.com/tai-lieu-antbuddy-huong-dan-su-dung-antbuddy-docs-user-guide/quan-tri-khach-hang-antcrm-antcrm-customer-management/cai-dat-settings/huong-dan-cau-hinh-dien-thoai-yealink-t19-e2-instruction-to-configure-yealink-t19-e2-phone.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.